Shortly after its foundation in 1994 in Pieštany, Slovakia, Telux started with the production of electrical ballasts with power ratings from 9 to 72 W. Eleven years later, the company started SMT production by upgrading its machinery…
Modern components such as the EVIYOS LED matrix enable the precise adjustment of an automotive front light in real time. In addition to a suitable stencil layout, a constant printing process is also required for perfect function in order to achieve permanently reproducible results.
The Productronica in November 2019 marks the twelfth anniversary of the market launch of stencil printers made by Ersa. Time flies …! The highlight of the first edition in 2007 was the integrated 2D print control, which enabled a 100% statement about the quality achieved. After printing, the PCB was completely captured using a scanner …
Good specialists are increasingly difficult to find – EMS heavyweight Zollner has therefore developed concepts for education and training to build up own personnel. System supplier Ersa supports the Zollner technical center with a VERSAPRINT S1-3D and a VERSAFLOW 4/55.
With its expertise in parylene coating, Heicks Industrieelektronik GmbH is a recognized partner for the aerospace industry – the North Rhine-Westphalian company relies on Ersa soldering technology from selective to wave to printer.
Light-emitting diodes (LEDs) have long since become an integral part of our lives – whether as automotive light sources, illuminated displays or displays. Long-lasting light requires the right connection to the module – the integrated 3D line scan camera of the VERSAPRINT 2 Ultra3 stencil printer allows the print result to be evaluated three-dimensionally.
The Ersa Technology Seminar “Design for Manufacturing” was a valuable transfer of know-how to the 58 participants from Germany, Austria and Switzerland. During the two days, topics such as CAD design, LP technology, components and production processes were covered.
Integrated full-surface 3D inspection, improved accessibility and automatic stencil bottom cleaning characterise the VERSAPRINT 2 printer platform, which can be retrofitted with additional options at any time and adapted to current requirements.
In order to master the challenges of the printing process and first pass yield, the Austrian company Tridonic has decided to use the VERSAPRINT P1 stencil printer with 100% inspection.
As an EMS service provider, Zollner Elektronik supplies “Solutions for your ideas” to global players and SMEs worldwide – system supplier Ersa has been supporting this for over 30 years with soldering systems, to date almost 60 systems have been installed.
